[Swantonbomboy]

Looking to make up a regulator tester.

Does anyone know what the threads on a Hyper 3 are?

Thanks all.

[grss429]

Originally Posted by Swantonbomboy

Looking to make up a regulator tester.

Does anyone know what the threads on a Hyper 3 are?

Thanks all.

Why not just pay the 25 bucks?
http://shop.dyepaintball.com/dye_am/reg-tester.html

best thing for a nt you can get also has a perge system.

it might cost you more to make one, as you can use a ASA...

[Swantonbomboy]

Originally Posted by grss429

Why not just pay the 25 bucks?
http://shop.dyepaintball.com/dye_am/reg-tester.html

best thing for a nt you can get also has a perge system.

it might cost you more to make one, as you can use a ASA...

I can likely make one from components purchased from mcmaster carr for cheaper.

[sl1980able]

I made one for the standard asa threaded one. I used a shocktech on/off asa and a plug on one side and a 0-300 gauge on the other. I use it for all other regulator that use that window operating pressure besides an NT. Which you Can get a really nice accurate one from DYE for the NT. Best purchase I have made for the NT. Cost wise depends on what you have laying around. You will need a way to relieve the pressure to make adjustments.