[casey standley]

hey fellow g6 runners . i have a 2012 oled g6r with 4c eyes. my question is i cant seem to get the rof better than 14 with eyes on. with eyes off i can get mid to high 20s but eyes turned on 14 max. ive tryed my hopper on other guns and reach 17ish easy so its not the loader. im at pretty much stock settings other than i moved the bolt delay down to 10 from 15 just to see if that helped but same 14 bps. any ideas why?? i run semi uncapped. is there another lock somewhere im missing? ty

[gamer565]

How are you determining that its 14 bps and the others are 17bps?

what does it do on uncapped ramping?

[casey standley]

it says 14 on the oled screen and across the chrono. i put my rotor on my buddys geo and on my dm and read 17 on gun and chrono.so im ruling out the loader. ive tryed fullauto 20bps and still get 14. it acts like its set at 14 capped

[casey standley]

both the ramps are capped. only uncapped im seeing is semi and fullauto. but i tryed 20bps(max) ramp and still 14

[gamer565]

You can uncap any mode.

Maybe your actually have the cap on and just don't know..

Do you have the stock 2c eyes that came with the gun?

[iboomalot]

put a prophecy on it and see what happens.

He has 4C eyes

[Rainingbrass]

Clean your eyes with a bit of alcohol

[gamer565]

Originally Posted by iboomalot

put a prophecy on it and see what happens.

He has 4C eyes

Opps left out some words in that sentence. Got it fixed now.

[casey standley]

i put the loader on other guns and it feeds more than 17 easy so ive ruled out the rotor.. it says semi uncapped. no i dont have the 2c eyes . i bought it from blast direct and zac long did the 4c eyes for me there. i just tryed it on ramp with 20 bps cap and still 14..

[gamer565]

List your settings.

[casey standley]

semi uncapped
ROF cap 20
debounce 01ms
mech bounce 03
trigger filter 06
dwell 06.0ms
bolt delay 10

[casey standley]

also gamer its the frenzy 5.0. im not seeing how to make my ramps uncapped. can u tell me. seems there capped at whatever my rof cap is and i have it at 20. but still only getting 14

[gamer565]

Originally Posted by casey standley

also gamer its the frenzy 5.0. im not seeing how to make my ramps uncapped. can u tell me. seems there capped at whatever my rof cap is and i have it at 20. but still only getting 14

I don't have a 2012 G6R, I can only go by what I have seen on videos.

I do know there's a 3 shot uncapped, and that is basically the same thing as PSP ramping, and there is full auto uncapped.

Reset the board to default settings. If the problems is still there, try a different hopper.

[RedAkuma]

scroll to ramp uncapped or semi uncapped, its pretty straight foward how to do.

[casey standley]

lol there is a semi uncapped. but both of my ramps are capped at whatever the cap is set at. pretty straight forward!! anyways thats not my issue.. i want to fix the 14 BPS. i can go full auto uncapped and still 14. ive put my rotor on other guns (like i have stated) and i get more than 14.

[gamer565]

Try a different loader, and default the board settings.

[SKI008]

You could try lowering your bolt delay.

[tim2thousand4]

easy bro, your fingers are slow

[casey standley]

Fingers slow when on fullauto and ramp it still only does 14.. ok.

[Jsres]

When shooting, does your eyes X out? I have the same problem sometimes and it caps at a certain bps

[Word?]

Oh frenzy...

Lord almighty I hate frenzy. This happened to me once, I'm going to say if a change of bip or stock settings doesn't change anything it's probably the board.