Machinist advice needed for cocker project
Ok I got black magic cocker in a deal gone bad. The gun was not what I was told it was, Now I am stuck with a gun That is in pretty rough shape. I want to have some custom machine work done to it. But I want to know that It will work before I commit to the project.
I dont pics of the gun currently. But U can google for pic of a black magic cocker if you dont know what the gun body looks like. I dont want to do a halfblock cocker like most everyone else is/has done. I want to keep the full length bolt. I want to remove the center section of the upper tube. Cut the front on an angle from where you cut it for a half block. And leave the back 1/2- 3/4 inch as well, also cut on an angle. But I also want to leave the sight rail that is above the upper tube connected to the front n back.
Can this be done without creating air leaks or other gun issues?
P.s the gun is ebladed is that makes any difference.
Thank you in advance for your help.
'12 BOB LONG G6R