My gun is less than a year old and I gave up on it after multiple trips to DYE to fix it and it never working. I literally have yet to play a game with it. I decided to tear it apart and try again. I found at least one problem is the line that runs from the solenoid to the front of the gun was cut about 2-3mm too short and causes air to leak from it when I try to shoot above 180fps. I'm about 10 seconds away from just throwing the thing in the garbage.
Does anyone know the size of the line used there? Or a place where I could buy them? It feels like small macroline but may just be a generic high pressure line. The macro line I have is too thick to fit, and the inside diameter is much to large.