[evan_ellerbe]

Recently modes angel 98 led to run on 9 v after old nicad died out , reply if u want details

[evan_ellerbe]

[Shooter28]

Virtue boards did this, but I don't think they're still available.

[evan_ellerbe]

Yea but this mod costs about 2 bucks and your time

[imOGpb]

details please sir

[evan_ellerbe]

[evan_ellerbe]

It's this circuit but the 6800 is 220 instead and replace the regular solenoid with the smc solenoid in the angel also stock charging switch now used as off/on

[evan_ellerbe]

Sorry meant 470 uf not 220

[evan_ellerbe]

Also the stock switch is not depicted but it can be wired in to any section of this circuit

[evan_ellerbe]

Last thing being when you fire the gun then turn the circuit off it still has one shot stored in the capacitor

[evan_ellerbe]

Best way to avoid this is to put the switch in the solenoid/ capacitor circuit

[RabidHobo]

i just used a 2k2 timmy board with a 9v all fitting in the grip, i had to mill the fram out some but it worked. i also enjoyed using the battery chamber to route wires for eyes. i think if i had used a universal t board i could have put that inside the battery chamber and used just the grip for the 9v.