prophecy z2 issues....belt o-ring size?
I've done searches, and can't find the official o-ring size for the prohphecy z2 belt o-ring. If anyone can get me that I'd appreciate it.
On to my continued issues: My prophecies are crushing/clipping paintballs before I even get to shoot them. They are breaking in the breech and the hopper.
I have adjusted all the settings, down to slowest speed, and it is still the same result. These hoppers are supposed to shoot brittle paint, but I am not seeing those results. Settings: speed 1, sound sensitivity 3, rf and motor sensing left at stock settings.
The drive doen't have any "slack" in it, so that when the bolt goes forward, the stack of paint has no where to go. It gets clipped by the bolt because the drive cone won't move backwards at all to allow the stack to move. I honestly want to play with different o-ring belt sizes to see if I can get a little slack in the action to allow me to feed and shoot brittle paint.
I have tried this same paint in my old Halos, and it will at least allow a little flex in the stack to allow the bolt to pass without breaking the next ball in line. My Z2's just won't allow any movement.
If I don't get this issue fixed, I'll be throwing these out the window. My 6-7 year old hoppers work fine, and I don't break paint. I keep trying my prophecy's, and I contine to get crushed paint in the breech.
TEAM METHOD - D.O.G.'s Boy's
Custom A1 fly collector (Looking for wonderboy a1 fly)
WANTED: Blue angel A1 grips
Wanted - Angel A1/SB/AR:K parts and markers broken or working
WANTED: Deathstix kits in Purple: http://www.pbnation.com/showthread.php?t=4579745