Etek 3 LT Does not accept ramping mode

JPBC · 01-01-2013, 02:16 AM

Hi guys

I bought my first marker a couple of weeks ago Etek 3 LT I've run a thousand balls through it no issues with firing. I just sat down and started looking at the settings. I have no issues getting the marker to accept uncapped semi or capped semi but i get red lights flashing when trying to put it on ramping mode? I've you tubed it & goggled it but im not getting far. The other thing is i live in Australia so whether that has anything with board I've got in the marker i don't know.
Any help would be greatly appreciated.

Cheers Justin

aresfiend · 01-01-2013, 02:31 AM

Well... If it's fitting the regional restrictions you won't have ramping. There are legal restrictions in place preventing ramp and full auto modes from being legal.

Clippy · 01-01-2013, 02:32 AM

Check with the guys at Action Paintball in Sydney or Perth. I think it has got something to do with our gun laws only allowing semi automatic so that's how they have to come in. Although one of the guys at my field (Action) was able to do it and the field owner also told me it could be done.

JPBC · 01-01-2013, 03:10 AM

If it is a case of being restricted what do you think my chances would be of getting a new board from the states. Was looking into etek2/3 virtue oled.

Clippy · 01-01-2013, 03:13 AM

It can have ramping enabled, it has to be able to as we use ramping in our tourneys over here. Call Action Paintball before you go to the expense of another board.

JPBC · 01-01-2013, 03:25 AM

Ill give them a buzz tomorrow cheers