[jscar1230]

I have a 2012 reflex that has been giving some problems. When its working its really good but then it will stop reading the balls in chamber. After a closer look I found that the bolt was too far back in the breach allowing the ball to recess behind the lasers. I pulled the bolt out to find that the can had come unscrewed which is why this was happening. Now Ive only owned the gun for a month so I thought it to be a fluke. Screwed the can back together (as tight as I could without the use of tools) and it worked perfectagain. After 1/2 case of paint middle of a game same problem. Now I have considered lock tight but Lokking for any suggestions or if anyone else has had this problem????

[TunaFvr]

Happens to me also. Same thing. I've found that if you don't grease the aft two green o-rings, that helps. Since I wiped off all the extra grease then it hasn't backed out in the last couple of days of playing. Even so I keep a 1/4 allen key on hand and check the tightness in-between games.

[jscar1230]

At least Im not the only one with the problem. That being said there is a solution just need to find it

[cmdrsuds]

Your back cap is likey coming unscrewed while shooting.