[modestokid209]

My pm6 will detect a ball in thr breech with the eyes on
The red goes to green but wont fire
But with eyes off it fires fine. Happened after i chopped a ball.
Took bolt out cleaned thr breech. Cleaned the eyes.
Still no avail. And need this figured out.
Thanks if anyone could help would be much appreciated.

[modestokid209]

Really no help

[JesseCanuck19]

Maybe try a new battery. Might be to low to fire the marker with eyes

[rzhukov]

first new battery, then it could be bad micro switch, board or solenoid

[modestokid209]

But when the eyes are off it shoots fine.
So i figure couldnt be either of the last 3

[pbkidminion]

Are you sure you have eyes?

[CrazyHarry]

Originally Posted by modestokid209

But when the eyes are off it shoots fine.
So i figure couldnt be either of the last 3

Assuming your eyes work properly (you can stick your finger in the breach and the color turns from red to green) then it's either your board or your battery. A low battery can cause all kinds of electrical nonsense, hopefully, it's not your board.

[speedy2k4]

Almost always a sign of a bad battery when it works with the eyes off but doesn't click with the eyes on. Not enough juice to power the eyes and the solenoid at the same time.