Crossover Board Programming Problem
Love the gun...hate the programming.
Here is my problem, with the tournament lock off, I can get the gun to go into programming mode in either yellow or green of the first menu, but I can't get it to go into any of the other firing modes. In other words...I can't get it to go past the part in red below from the manual. I know that some folks have been having some issues with the board so I was wondering if anyone had a solution?
With the Selector Switch still set to electronic mode (the “A” position), press and hold the programming button for 2 to 4 seconds, then release the programming button. The LEDs flash orange four times, and then the top and bottom LEDs go off to indicate you are in programming mode. The middle LED displays the color of the currently selected fire mode. Pull the trigger one time. Watch the middle LED when pulling the trigger. The two menu choices are:
Green > Firing Mode Yellow > Advanced Programming
Further trigger pulls continue to alternate between these two menu choices above.
Use an extended trigger pull (approx. 2 seconds) to select the menu item you want. The middle LED flashes four times in the color of the menu item you just selected when you release the trigger.
CSM 82nd AB Div (D-Day)
DM12 Black & Tan