Hello everyone! I thank you for viewing my thread! So, on 10/28/12, I had a 3 man tournament! It was about 35' in Michigan, so it was cold! I was shooting Empire custom blend paint (2 tone yellow shell with yellow fill).
My set up I was using:
Vicious Ego 10
Dye U.L barrel (.684; I switched to stock because it was to small)
Crossfire 68/45 (Low Pressure)
So, I get there, and chrono, and it was all over! Raised the HPR till it was at 280ish! By the time it got to 280, the screw was past flush, going out of the marker.
So, I didnt think of anything about it.
Got out there, and it was blending paint!
Yada-yada. So, I get home with a case, and today I break it out! I made a thread earlier this week, or into last week asking for tuning help!
I reset my board (Pretty sure I bumped the dwell .5 up) and I reset my LPR, and lubed everything with the P.E oil.
I take my Ego outside to shoot it, and I still have to have that screw all the way out for it to get up to good FPS!
What could you diagnose about it? Is it because I am using low pressure?
Any help is appreciated!