so there are an awful lot of threads out there where new G3/G4 owners are looking for the best upgrades for their guns/what upgrades are available.
well here is the page of the best upgrades available for your new marker! and everyone else will agree!
: new barrel is what most of you are thining. stock barrel isnt terrib, but a lot of people seem to not like the stock? there's plenty of barrels around!!! all are great! some reccomended and commonly used barrels are
-TechT iFit kit
-Dye Ultralite Barrels
-Eclipse shaft barrels
-any good barrel kit!!!
if you have any further questions on barrels and which is better click here
it's under fundemental agreement that the TechT L7 Bolt Engine is the best improvement for the G series markers.
and that looks like:
and that can be found here: http://www.techtpaintball.com/Products.aspx?CAT=3190
The TechT Bolt Engine will make your G4 more accurate by reducing recoil and barrel rise. It'll also make the G4 MUCH more quiet and more efficient.
: If you're playing recball or semi uncapped tournaments the stock board will do you just fine! but for players playing PSP style tournaments and X-ball you're going to need an upgrade board. and the APE OLED is all around agreed to be the best board available for the g3/g4!!
that looks like:
and can be found here: http://www.goapeonline.com/index.php...id=6&Itemid=28
After those three upgrades, there really is no way to further improve your marker. it is upped to the MAX and is without a doubt awesome!
there are many other aftermarket parts/upgrades for the G3/G4, here is the list of all that i can think of (including the ones i already listed)
LIST OF ALL THE AVAILABLE UPGRADES
-APE rampage board
-APE OLED rampage board (listed above)
-Virtue OLED board
-7th element board
-NDZ back cap (for use with stock bolt or L7 bolt (not the bolt engine)
-TechT L7 bolt (not the bolt engine, and only for G3/IQ/Nano)
-TechT L7 Bolt Engine (listed above)
-TechT tooless back cap
-7th element & virtue laser eyes
-PMD (pressure measuring device)
-any DM threaded feednecks will fit the G3/G4/SpecR
-any standard ASA threaded HPR will fit the G3/G4/SpecR
-Most ASA's with a standard rail mount will fir the G3/G4/SpecR (there has been some asa's known to not fit
-Miscellaneous triggers (ex CP, Violent Series etc)
-Any Autococker threaded barrels wil fit the G3/G4/SpecR
hopefully this will stop the overflowing amount of new threads that are asking the same questions about the G3/G4/SpecR upgrades!