[call_me_X]

Alright so I have my empire axe for speed ball and a bt erc for my friends to borrow but I want a pump gun for rec ball/practice. But it needs to have a few things one it needs to have parts heavily available in case of repair and it needs to take hpa tanks. What should I get my price range is large 0-450 any higher and I might as well sell my empire axe for a pump and get a geo3 ( I gots teh hookups )

[Mocking Da Bird]

Empire sniper, or any autococker would do fine.

[call_me_X]

Ok, cause my goal is to have a good lend put gun (empire axe) have a good speed ball gun geo3, have a good pump gun aswell as a great scenario gun looking into the dye dam. But I'm craving some pump action,

[Castro #66]

Can't go wrong with the Empire Sniper.

[TheHoneyBadger]

Im getting an empire sniper on my next paycheck

[Ninfofan]

Does the Empire Sniper take HPA tanks with med output pressure (450-650 psi)?

[Mocking Da Bird]

Originally Posted by Ninfofan

Does the Empire Sniper take HPA tanks with med output pressure (450-650 psi)?

Yes. You'd be doing the marker a favor by having less pressure than high pressure.

[Castro #66]

It will run fine on anything above 400 psi. Might be a little trickier once you get close to 250.

[call_me_X]

Ok so I received an early Christmas gift from a good friend, I was gifted an original pmi tracer, I tested it put in the back yard and it works amazing literary stunning for a 10+ year old gun with a barrel that lacks porting, I have one problem I can't find a feed neck that fits it, does anyone have any suggestipns I'm thinking about just using a ten tube and putting a c#ck ring onit so it doesn't fall down to deep in the feedneck so it blocks the bolt, yeah it will look hella funny to those that know what the overly large o-ring really is