ion and epiphany boards interchangable?

modestokid209 · 10-20-2012, 03:06 AM

Hwy guys quick question
I own an ion and just bought and epiphany for dirt cheap
The owner of the epiph doesnt no details about whats wrong with it
Frim the pix i got looks like theres no wiring for the battery on the virtue board
Are the ion and epiphany boards interchangeable? Thanks

sumsemperfi · 10-20-2012, 07:31 AM

How old is the ion. When the epiphany first came out they had diff boards but after that they had the same. The virtue board should work for both tho. The only diff is the color of the solenoid on the stock board

modestokid209 · 10-20-2012, 11:30 AM

Ok
And i have no clue wat year the ion is. I got it in a package deal with pm6 bushy and ion fot $200

ballahamman32 · 10-20-2012, 11:33 AM

Should work fine it's the same board you just mogul have to adjust settings

theblindchicken · 10-20-2012, 02:33 PM

The visual difference between an Epiphany STOCK board and an Ion STOCK board is that the Epiphany solenoid coils were wrapped with red tape that had Ion (in black) printed on it. The performance difference between the two boards are that the Epiphany solenoids were rated for a higher psi than the Ion boards.

The boards are interchangeable, but be careful that you do not damage an ion board by inputting a pressure beyond what it is rated for.

Also, if the battery harness on your virtue board is broken and/or missing, contact virtue and they should send you a harness or two your way in the mail.

Virtue did make some Epiphany labeled boards as well as Ion labeled boards. I do not know if there was any difference between the two.

modestokid209 · 10-20-2012, 09:40 PM

O ok. Ya im waiting for the epiphany to get here
So i can dig deeper into the gun. Thanks guys
Ill keep u updated