Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-01-2012, 08:41 PM #1
pballer0303
shreddin the gnar
 
pballer0303's Avatar
 
Join Date: Nov 2009
Location: Duluth
pballer0303 has achieved Level 2 in PbNation Pursuit
Shego...what needs to be done?

Ive decided on what my winter project will be, a shego. I do have access to a mill, and Im willing to use it.

So what do I need to do other than fit the frame?

Should I use an etek board? Shocker board?
pballer0303 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-01-2012, 09:26 PM #2
Box
Wroooaaarrrr!
 
Box's Avatar
 
Join Date: Sep 2005
 has been a member for 10 years
I'd go for the Ego board. It eliminates the terrible upper board and requires less modification, while allowing break-beam eyes. You'll have to wire an Ego/DM solenoid connector to the Shocker noid, or use an 05/06 Ego Noid. There will be a little meat to take off the Ego trigger if you choose to use a Shocker noid.


Search "Shego" StrangeBalla55 made a how-to
Box is offline   Reply With Quote
Old 11-02-2012, 08:52 PM #3
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Milwaukee
inmylife2415 supports DLX Technology
inmylife2415 supports Shocker RSX
1st- determine 05/06 ego noid or shocker/impulse/sport
2ed- desolder upper board, solder leads on noid, crimp, and take noid mounting screws to correct size
3rd- probably going to want to use ego board and eyes(oled screens are nice)
4th- (only if you use shocker noid) mill the top of the frame and back of the trigger to fit noid
5th- drill holes to mount frame to the body
6th- drill/mill body for break beam eyes.
inmylife2415 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump