[AxeFreak]

Hey guys..

I have the SE White and Gold Dye I4s and the glare is terrible on the lens.. Anyone have any suggestions on this?

[Open_Truth]

Perhaps take some black electric tape and place int inside the frame, on the bottom of where the lens mounts. You are probably getting glare from that part.

[Mr Idiot Box]

Your getting glair off the part of the frame that wraps around the nose. Quick fix is electrical tape. Flat black plasti-dip works wonders and looks better if done right.

[AxeFreak]

the nose line and the fore head is where I am getting most of the glare.. I thought about just painting it but i don't want that strong smell of paint on the mask either..

[Mr Idiot Box]

Originally Posted by AxeFreak

the nose line and the fore head is where I am getting most of the glare.. I thought about just painting it but i don't want that strong smell of paint on the mask either..

Plastidip don't have a real strong Oder, Especially after it dries. If you mess up or don't like it you can Peel it right off.

[AxeFreak]

I will be trying it out this week then!!! Thanks.. I like the fact that it will peel off.

[Mr Idiot Box]

Originally Posted by AxeFreak

I will be trying it out this week then!!! Thanks.. I like the fact that it will peel off.

I would follow the mask painting threads suggestions for best results. It shows a step by step process. You will get the nicest results that way. I would just mask off what you dont want painted. If you paint the entire thing it will chip off. I would just paint the inside to remove the glare. (The parts that don't get abused by playing)

http://www.pbnation.com/showthread.p...ht=painting+i4

[MOOSE93]

I had the same problem and used a Sharpie to color over the white part. Got the glare down to a reasonable level but I am going to go over it again just to be safe.

[bunkerking_13]

black electrical tape works perfect as well.

[AxeFreak]

Thanks guys!! I will try to take and post pictures for this project! I am sorta bummed about the I4s I have the Sly and they seems like a high quality mask than the I4 and they cost only 100$$

[Profesionalrussian69]

Pics?

[Mr Idiot Box]

Originally Posted by AxeFreak

Thanks guys!! I will try to take and post pictures for this project! I am sorta bummed about the I4s I have the Sly and they seems like a high quality mask than the I4 and they cost only 100$$

It's only because you got the white. The I4 fit closer to your face, breath better hold up better and have better lenses and never fog. If you can get the I4 to fit your faces its hands down the best mask on the market. I never buy White gear because it's usually filthy in a few months of use. once you fix the glare issue you will like them. I just went back to them after using a few different high end masks. I stuff my fat face in them and ware them low with two head wraps to wear them because I like them the best.

[stan279]

I've got a pair of the white camo i4s and I used gaffers tape on mine because it's more matted than electrical tape and it doesn't leave residue if you want to take it off. Haven't had any glare issues since I did this.

[Seksirojo]

I know this thread is old but i didnt want to start a new one. So by any chance did u get those pics?

[event28]

wanna trade for some black and gold i4s? i want white ones for a project

[soccerguy243]

black permanent marker (sharpie). Obviously let dry before use...