[ktbkid14]

i have read the instructions to capp my gun to 12 .5 but its not working the best it seems weird

sear is at 4.0

cdelay is at 6.0

con is at 65

ct/out is 1.0

and c off is at 40

[cmdrsuds]

con doesn't make a difference when eyes are on adjust your cdelay and c off instead. perhapse lower the c off and increase your cdelay??

[ktbkid14]

i need to know the exact settings because now my gun seems to be lacking

[Dk-79]

Your Coff seems a little long, but you do have to limit the bps somehow.

Can you elaborate on what lacking means? Slow, inconsistent,funny sounds or anything?

[ktbkid14]

well i put paint throught it and it runs smooth do i need to turn my c off up to get the bps down because its a 13 bps right now

[All-Star Reject]

With your current settings with the eyes off you would be at 9bps
CT=CDEL+CON+COFF
1000/CT=BPS
so 6+65+40=111
1000/111=9.009
With the eyes on CON is controlled by the speed of the loader to load paint into the breech. So like cmdrsuds said you will need to adjust the CDEL and COFF.
Raise your CDEL to 6.5 and COFF to 45

You can also use your Trigger pull and release filters to slow you down. Raise each one by 1ms then check your results.

If you are happy with your trigger feel then I would leave the filters alone but do one then check your results and then do the other. Be sure to keep notes on what settings did what and remember to use the same hopper with fresh batteries.

[ktbkid14]

thank u very much

[ktbkid14]

well acutally my coff is at 28 so should i raise it to 40 again to see if it will lower to 12.5

[Reddawg]

Someone post this a while back I have never tested it to see if correct.


-Allways keep your cto at 255*-
Always keep your blad and empd settings at factory settings.


See the below examples


Fast

Son- 004
CDEL- 003
Con- 065
Cto- 255
Coff- 028

10.42 BPS

Medium

Son- 005
CDEL- 006
Con- 075
Cto- 255
Coff- 033

8.77 BPS


Slow
Son- 006
CDEL- 009
Con - 085
CTO- 255
Coff- 038

7.58 BPS

Son- 003
Cdel- 003
Con-33
Coff- 19
For a ROF of 17.24 BPS

Son- 003
Cdel - 003
Conn - 030
Coff - 019

ROF- 18.18 BPS

--------------------------------

Son- 004
Cdel- 009
Con-39
Coff- 19
For a ROF of 14.9 BPS

son 4
con 18
cdel 3
coff 15

27.77 BPS

----------------------------

SON-003
CDEL-004
CON-025
COFF-025
ROF= 18.5 BPS

CON=22
COFF=15
CDEL=04
TPUL=02
TREL=02
24.3902 BPS

SON=002
CDEL=003
CON=030
COFF=023
TPUL=001
TREL=003
Max ROF= 17.85

[All-Star Reject]

Reddawg, those settings are correct for eyes off. Just remember that the CON will be controlled by the eye when it is on and then it comes down to the speed of the loader. One way to ensure consistency is run your loader as fast as it will load and control the ROF by the software, the CDEL and COFF settings.

ktbkid14 raise your COFF and use PSP mode to run 15 to 20 shot strings over a BPS chrono to see what you are getting. Don't use the counter on the gun as I think it rounds up and never rely on the counter with the eyes off as like I said before it will be different with paint and eyes on.