Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-26-2012, 07:53 PM #1
swampster123
I choose you!
 
swampster123's Avatar
 
Join Date: Jan 2012
Location: San Antonio
swampster123 posts videos on PbNation
swampster123 has achieved Level 2 in PbNation Pursuit
swampster123 has achieved Level 3 in PbNation Pursuit
Pure Energy LP conversion

I bought a LP conversion for my Pure Energy tank. I have the blue reactor reg btw. And I got 10 curved shims with 2 very thin circular washers. On the directions is says 12 shims.....is this normal? Am I missing some?? How can I tell what my output pressure is? I have a G6R so need it low pressure....Do i use both small washers or neither or one? Thanks, Tyler
__________________
swampster123 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-26-2012, 08:12 PM #2
Tabris17
Will B/S/T Souls
 
Tabris17's Avatar
 
Join Date: Jan 2006
Location: Connecticut
Annual Supporting Member
Tabris17 is a Moderator
Tabris17 is BST Legit
Page 1, right side half way down to the bottom has everything you need.
http://www.paintballsolutions.com/pd..._Manual_LR.pdf

Those washers are for fine tuning your pressures. They're included in the count to make 12 but it's 10 curved shims and 2 adjustment shims which are flat washers. Same you'll find in your reactor reg with the HP, 10 curved and 2 flat.
If you need further help and the ultimate sticky doesn't help then contact paintball solutions which is tech support for KEE/Empire.
Tabris17 is offline   Reply With Quote
Old 11-14-2012, 05:50 AM #3
Oldandsneaky
Still My Pump Badge
 
Oldandsneaky's Avatar
 
Join Date: Aug 2012
Location: Port Orchard, WA
Annual Supporting Member
Oldandsneaky has achieved Level 3 in PbNation Pursuit
Thanks for the info. I had to change a bonnet and a belleville washer fell out of the regulator. This helped me re-assemble the stack correctly.
Oldandsneaky is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump