[Nickdennis]

Im going to build a custom cocker and need to know if im missing anything. Its going to be a sunburst orange/Polished Black anno halfblock Karni. I have an mq2, an ego 10 frame, pops asa, cp reg, eye, eye cover, karnivor solenoid cover, solenoid, yakuza board, macroline, Belsales evo lpr, belsales ram, belsales qev's, black 3 way hosing, karnivor front block, violent trigger, halfblock bolt/sled, black pump arm, wire pipe, ball detent, custom grips, dye boomstick carbon fiber barrel, clamping feedneck, and the banjo bolt. Im pretty sure thats everything but if im missing something please let me know.

[Fearless_Leader]

How do you plan to mount the ego10 frame?

[Nickdennis]

lol working on it

[Nickdennis]

I got the frame for free so im going to attempt to work with, if not i do have a etek 2 frame

[dbkid0486]

Originally Posted by Nickdennis

I got the frame for free so im going to attempt to work with, if not i do have a etek 2 frame

youll more than likely have to mill the body to fit the frame or make a tray to fit in between the body and frame. I dont think there is enough metal to mod the actual frame.

[Dk-79]

Use a frame with a flat top.

[Powkoa]

Ivg to hold the mq in.
Please mid block it instead of half blocking it

[inmylife2415]

Please dont halfblock a karni, if you bought it that way thunder punch the person you got it from in the face!!!!! As for the frame, etek frames are played out, make a tray and use the ego 10 frame.

[PeaTear_Griffin]

Yes midblock it, the karni looks so good midblocked when you follow the natural profile/lines of the milling on the gun.

[papaintballer15]

hes just tryin to make a cocker that can compete with my Evo's but its not gonna happen

[Nickdennis]

Originally Posted by papaintballer15

hes just tryin to make a cocker that can compete with my Evo's but its not gonna happen

I wish I had one of your evos, but iv had this idea for years...also still thinking about doing it midblock instead of halfblock, not sure yet

[Rebel_816]

someone managed to mount an 07 ego frame before, i think they had to mill both the bottom of the body and the top of the frame, it was pretty thin in places though.

it would be awesome if you could get it to work, i figure youll have to mill the top of the frame a little though since they seem to recess more into the body now. ive always thought it might be easer with a merlin body since they are thicker on bottom.

[Fearless_Leader]

you can cut the frame flat or you can mill the body and 07 frames will work.

[twiitch]

you can use any frame you want. your going to ahve to mill it. at very least new screw holes, and at very worst, milling to fit the yakuza. I use a PM5 firce and a pm4 frame. the pm5 you can make it work without milling the trigger guard at all.