[Way2scary4u]

Okay guys, just wanted to know how to tune my smart parts ion.

[Sqratch]

This website is full of good info.

http://www.zdspb.com/index.html

[Way2scary4u]

Thanks. What do you do to tune your ion.

[GhostDog76]

that website helped me bunches

[Way2scary4u]

I just want to know how I tune and make my ion the the best it can be performance wise

[theblindchicken]

Pulled from the Ultimate Ion Guide.

Originally Posted by Kolder

Q: How do I fine tune my Ion for best performance?
A: Following these steps, you can setup your Ion for best gas efficiency and velocity consistency. Your reg must be properly broken in and lubed for good results. I get +/-2 fps at the chrono.

1. Bottom out the dwell
2. Set your input pressure to about 120 psi
3. Increase the dwell until the marker cycles properly at +/- 10 fps consistency
4. Increase your input pressure up to desired fps
5. Increase the dwell up by 1 until velocity stays consistent. If consistency is already good. reduce the dwell down by 1 until it becomes inconsistent, then bring back up 2.

Also, you can use ZDSPB's website..
http://www.zdspb.com/tech/mguide/ion...ectronics.html

[Way2scary4u]

Thanks man