thoughts on the bag of the demon

djtail · 10-25-2012, 10:37 AM

received the case today for the demon, the first impression was wow ...

but after opening the case, I was not so satisfied anymore, the cut out parts for the marker and barrels, are to small soe u can't fit them in there....

the inside of the case just feels cheap. this would have been okey if the price tag not wasn't so high.

the only way to make the marker and barrels fit is to cut out parts urself to make it fit....

any other who has the same experience like i have, or did i just reccived a bad batch?

*^* EDIT*^*

problem solved thx to Jason....

to get it down in the case Undo your feedneck lever and turn it through 180 degrees so the lever is showing, it will then fit , we had them done this way so the accents were on view in the case

Reaper (ACI) · 10-25-2012, 10:50 AM

Have not heard this issue before. I'll look into it.

MstrKey · 10-27-2012, 03:37 PM

Seems weird. The parts are supposed to be worked into their slots so they're tight and don't fall out. That's the point. If they just drop in then they can just drop out just as easily.

I've never had a gun case of any kind that wasn't like that, so I'm not sure what the problem is.

jtusawgp · 10-27-2012, 07:48 PM

My case is fine I'm not sure what your issue is. They are meant to fit snug and tight so stuff doesn't move around inside the case.

Reaper (ACI) · 10-27-2012, 08:46 PM

OP, can you post a picture?

djtail · 10-28-2012, 05:40 AM

It's a difference between snug fit and impossible fit. Will post pictures... My cases for the ego' s and geo's are snugg. But u can put them there

djtail · 10-28-2012, 12:16 PM

here are some pictures to show what i mean

it pressed so far it can on the front, but as u see in the first picture the marker sticks out from the case.... the feedneck it outside the "foam"... so it's not possible to get it down in place

d

Reaper (ACI) · 10-28-2012, 02:42 PM

Well that's clearly not right. Wonder how many of these we bought....

djtail · 10-28-2012, 02:45 PM

is this something u can fix reaper? or should i contact jason?

jason_vanguard · 10-28-2012, 02:54 PM

Undo your feedneck lever and turn it through 180 degrees so the lever is showing, it will then fit , we had them done this way so the accents were on view in the case

djtail · 10-28-2012, 03:55 PM

ah, that worked... stupid i feel now

i will edit my first post... so other with the same proB knows the solution!

Reaper (ACI) · 10-28-2012, 07:41 PM

So wait, they fit with the feedneck on backward?

Chris Hazard · 10-28-2012, 08:37 PM

my case it also set up for the feedneck clamp to be backwards, not a problem, I just re-shaped it to fit it normally.

jason_vanguard · 10-29-2012, 02:02 AM

Quote:

Originally Posted by Reaper (ACI)

So wait, they fit with the feedneck on backward?

No Mike, just spin the ring round

djtail · 10-29-2012, 06:05 AM

i will post a new pic with it inside

djtail · 10-29-2012, 06:11 AM

Reaper (ACI) · 10-29-2012, 11:35 AM

Okay. Gotcha.

MstrKey · 10-29-2012, 01:05 PM

Ahhhhhh I see now. That is still kind of weird that you have to spin the feedneck. Still if you're going to go to the trouble of breaking your gun down I guess that's not a problem.

I'm too lazy for that, I leave my gun totally together and transport it assembled, unless I'm flying of course which I never do anymore.

w028bjm · 11-03-2012, 02:25 PM

I love my case over the box. I do have one problem with mine that is weird, if I have just two barrels in the case they are fine and stay put but if I put a third barrel in, they all fall out and the straps barely hold them in place.

djtail · 11-03-2012, 06:50 PM

Quote:

Originally Posted by w028bjm

I love my case over the box. I do have one problem with mine that is weird, if I have just two barrels in the case they are fine and stay put but if I put a third barrel in, they all fall out and the straps barely hold them in place.

i have the same problem!