[moocowz]

Gun wont shoot fast with eyes on. Eyes are cleaned and gun indicates that, already went through 3 new batteries, no wires look pinched or destroyed, not sure what else to do.

[910 balla]

Originally Posted by moocowz

Gun wont shoot fast with eyes on. Eyes are cleaned and gun indicates that, already went through 3 new batteries, no wires look pinched or destroyed, not sure what else to do.

check your BPS?

[moocowz]

Originally Posted by 910 balla

check your BPS?

already did, gun shoots 12 with eyes off but about 4ish with eyes on

[grss429]

Originally Posted by moocowz

already did, gun shoots 12 with eyes off but about 4ish with eyes on

You mean 8 BPS, a gun wont shoot 4 BPS.. anyways with the eyes on no balls in the chamber does the gun still fire? is the LED on the side of the grip green or red with no balls in it?, if it's red and eyes are indeed working then it's either a board issue or a eye issue. (I'd reset your BPS/board to stock)

[moocowz]

Originally Posted by grss429

You mean 8 BPS, a gun wont shoot 4 BPS.. anyways with the eyes on no balls in the chamber does the gun still fire? is the LED on the side of the grip green or red with no balls in it?, if it's red and eyes are indeed working then it's either a board issue or a eye issue. (I'd reset your BPS/board to stock)

LED is red with no balls in breach, gun wont shoot with eyes on and nothing in it.

[GaryR1984]

Sounds more like your settings are incorrect. The eyes are obviously reading.

[moocowz]

Originally Posted by GaryR1984

Sounds more like your settings are incorrect. The eyes are obviously reading.

Just went through all settings again, reseting all to stock as well. Still can't solve this issue

[moocowz]

LED is now blinking green...

[braveboys85]

Your eyes are dirty or bad. Take out eye pipe and your eyes and clean everything good

[grss429]

Originally Posted by moocowz

LED is now blinking green...

that's what I figured... it's a eye malfunction something is blocking the eyes from reading each other.. there is a few possibilities,

A( Your eyes are dirty..

B( Your eye pipe is dirty

C( Your eyes are broken..

Now try a few things first..

A( take your eye pipe out, and see if the eyes work, if they do, Slide your eye pipe back in and see if the LED is green.., If so then your eye seat retainer needs to be readjusted, meaning it's the black rubber piece under the eye pipe that holds your eyes in place. (this is the most commen problem)