[wyndan21]

my nt is louder than a ego? wtf is going on i thought it was suposed to be quiet and soft like a luxe? dammmmm my axe is quieter and its a 300 dollar pick up?

can someone help me what is going on i had the nt 11 green insert the orange bolt donut and the red bolt tip...

no spacers stock dye ul...

its a nexus nt 10

all the orings are black buna..

dwell is at 6.. i dont know what to do or how to tune it im new to it!!

[speedy2k4]

My NT had a really loud pop to it, but it shot smooth.

Check your pressure though. If you don't have a pressure tester, get one.

[Weven]

you could try increasing the dwell which will allow you to lower the pressure a little.

[EAGLES83]

dwell 9, and when i had a 10, i always liked the spacer body in and set the hpr to chrono, and i realize its a nexus but make sure it has the updates, Ive owned 2 nt10's and now the nt11 and none even come close to an ego, so there is hope. All have outshot the geo byfar aswell.

[wyndan21]

Originally Posted by EAGLES83

dwell 9, and when i had a 10, i always liked the spacer body in and set the hpr to chrono, and i realize its a nexus but make sure it has the updates, Ive owned 2 nt10's and now the nt11 and none even come close to an ego, so there is hope. All have outshot the geo byfar aswell.

yes i have the updated parts i replaced the copper spring to a brandnew one the one in it seemd really worn and shorter than the new one i put in...

also i will try tune it a bit more ill give it a chance..

i really dont mind the poppy-ness of the nt at all it just the loud ego like POP POP POP POP it was doing i almost stomped out the gun... lol


DOES ANYONE HAVE AND SUGGESTIONS ON WHAT WILL MAKE IT THE QUIETEST POSSIBLE I DO NOT CARE ABOUT EFFICIENCY AS LONG AS IT MAKES 5 PODS AND A ROTOR IM GOOD

[Ravenstylea2]

In my sig, I made a vid of a Bwin'g NT11. It quieted down the marker to a good degree. Maybe Billy Wing could tune it.

[wyndan21]

Originally Posted by Ravenstylea2

In my sig, I made a vid of a Bwin'g NT11. It quieted down the marker to a good degree. Maybe Billy Wing could tune it.

WHAT EXACTLY DID HE DO?

[Ravenstylea2]

Originally Posted by wyndan21

WHAT EXACTLY DID HE DO?

Just get it done its inexpensive and worth it.

[PedroBR]

Make sure you have the correct eyepipe. The DM eyepipe works on the NT, but it is shorter than the NT eyepipe - and with the DM shorter eyepipe your bolt will be firing INSIDE THE BARREL - making things very loud.