Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-30-2012, 07:31 PM #1
Washington Reign
 
 
Join Date: Jul 2011
NT 10 issues, randomly stops shooting

So I have an NT 10 that's basically worked flawlessly all summer and it just started acting up, it will randomly just stop shooting and little puffs will come out until I bump the HPR up a little bit then it will be good for 50-60 shots then it will repeat. So far I've

Changed the spool spring ( brass one )
replaced every oring
several new batteries
tried another Hyper 3 reg
rebuilt the hyper 3 and veriefied pressure is correct.
Reset the board back to stock just in case
Raised the dwell to 8 ( it's cold in Wa figured it would help )
Noid is clicking, cleaned manifold just in case

Currently I'm not using any insert at all. Any insight would be greatly appreciated.
Washington Reign is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-01-2012, 10:36 AM #2
HotxRod
 
 
HotxRod's Avatar
 
Join Date: Jun 2012
Location: San Diego, CA
HotxRod works for a Paintball manufacturer
HotxRod has achieved Level 2 in PbNation Pursuit
You may need to try a new solenoid pilot
HotxRod is offline   Reply With Quote
Old 11-01-2012, 06:58 PM #3
rooster_2010
 
 
Join Date: Feb 2010
Have you tried a different lube maybe a thinner lube like hater sauce...
rooster_2010 is offline   Reply With Quote
Old 11-01-2012, 07:21 PM #5
Washington Reign
 
 
Join Date: Jul 2011
I haven't tried a thinner lube , I've just been using the dye lube. I'm not sure what I could replace on ther bolt that I already haven't yet would you mind being more specific? And I really hope it's not the noid, is the NT11 noid compatible and more reliable?
Washington Reign is offline   Reply With Quote
Old 11-07-2012, 01:26 PM #6
EAGLES83
Headshot Hotshot
 
EAGLES83's Avatar
 
Join Date: Mar 2008
Location: Victoria, texas
Annual Supporting Member
EAGLES83 is BST Legit
EAGLES83 is Legendary
Solenoid pilot...$60 from dye. Period
__________________
MVP ALLSTARS
EAGLES83 is offline   Reply With Quote
Old 11-15-2012, 07:40 PM #7
GaryR1984
 
 
GaryR1984's Avatar
 
Join Date: May 2011
Location: Chicago, IL.
Mine stops too, just got it back from Billy, it just stops a full cycle, I assume I should try raising my dwell? It's much colder here then where Billy lives so I assume it's cold related, hence my thought of raising dwell. Any thoughts anyone?
__________________
NAUTILUS
Team Thread
GaryR1984 is offline   Reply With Quote
Old 11-15-2012, 08:10 PM #8
GaryR1984
 
 
GaryR1984's Avatar
 
Join Date: May 2011
Location: Chicago, IL.
Read my manual, gonna raise my dwell and see how she does, gonna be 45ish Saturday so, we'll see how high I need to make it.
__________________
NAUTILUS
Team Thread
GaryR1984 is offline   Reply With Quote
Old 11-18-2012, 11:44 AM #9
Washington Reign
 
 
Join Date: Jul 2011
I bumped the dwell higher than I was comfortable with and it still does it. Just going to order a noid from Dye hopefully it helps
Washington Reign is offline   Reply With Quote
Old 11-18-2012, 04:06 PM #10
wesr
 
 
Join Date: Feb 2009
I found my spool liked lots of lube on it... If it dried up it would give me the puffs like you described. Maybe try more lube on your spool. It could also be your Jodi like the others suggested.... Seems lots of nods crap out. Don't know why... Never had any issues with their noids before
wesr is offline   Reply With Quote
Old 11-30-2012, 05:58 AM #11
xyder
 
 
xyder's Avatar
 
Join Date: Jun 2011
xyder owns a Planet Eclipse Geo
xyder plays in the APPA D4 division
i had a similar issue, started using sleek (Dye lube freezes apparently in winter, havnt tried) and not its fine but you can also try bump your dwell up 1-2 and it should shoot fine.
xyder is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump