[jasper420]

I just changed every oring, all inside and out but when i pull the trigger it just blows air out of inside the grip frame by the solenoid. I chsnged the orings between the solenoid and the frame and its still doing the same thing, the bolt will not move, any help will be appreciated. Thank you

[gildy1]

you either have super bolt stick or blow by ( puffing ). clean down all orings, and find orings that are snug for the bolt sail, inner back latch, and 3rd inner can. If those orings are snug then it will create a perfect seal and bam, shooting luxe. try to get your hands on those Green orings, those provide ( in my experience ) the best performance.

[Giruc]

just reoring ur gun look at the stickies for charts if this fails u might have overpressurized ur noid

[Wastedslayer]

Also would help to let us know what core your using

[Ragin Cajun]

Three main problems with bolt stick. Middle oring in the can, bolt sail oring or the inner oring on the rear latch. Make sure this oring fits the bolt snug.

[jasper420]

Originally Posted by Wastedslayer

Also would help to let us know what core your using

Its a 1.0, thanks for all the help, i think the after market oring kit is garbage, some of the orings look alittle thinner than the originals, i guess im gonna give it to the luxe guys at cup cause i dont want to use the other orings anymore. Any suggestions other than an oring kit from luxe?

[jasper420]

Originally Posted by gildy1

you either have super bolt stick or blow by ( puffing ). clean down all orings, and find orings that are snug for the bolt sail, inner back latch, and 3rd inner can. If those orings are snug then it will create a perfect seal and bam, shooting luxe. try to get your hands on those Green orings, those provide ( in my experience ) the best performance.

Gildy1, where can i find those green orings cause there was some greenish yellow ones on it before i changed them and they seem to look and feel alot better than the kit of blk orings i bought. Thanks for your help

[digital sol]

I use the green orings for all of the 017 spots. No orings bleed with the lube and they seem to last longer and seal better. Got mine here

http://www.amazon.com/gp/aw/d/B001HT...dir_mdp_mobile

Or

http://www.theoringstore.com/index.p...oducts_id=5384

[billyverduzco]

Hey man I got the same problem with mine did you get it fixed?

[georgiathrill18]

Thank you for links to buy the green orings I've been looking for some