[brendans0cool]

Well guys, the sear spring for my azodin KP has fell off.. I do not know how to reconnect it to the frame for the sear to keep the rammer in place..

Any help is appreciated.

[brendans0cool]

Help needed!

[ttimberlak443]

That happened on my Blitz. All I had to do was push the spring into a notch in the sear and then a notch on the frame and push the sear down a few times to make sure it was working correctly. It could be a little different on the KP Frame, but hopefully this helps.

[brendans0cool]

I have had a blitz and it is different from the kp.

[ttimberlak443]

Originally Posted by brendans0cool

I have had a blitz and it is different from the kp.

Then I don't know. Your best bet is to call Azodin at this point. You'll probably be off the phone within 10 minutes.

[brendans0cool]

Help!!

[samdolphin5]

yeah,you should call azodin

[MikeHawk619]

i took the sear and super glued it to the end of a screw. then super glued the head of the screw to the inside of the grip frame then just taped it for extra security. it doesnt look good but it does the job and inside the grip frame anyways so no one can see it.