Originally Posted by ArchAngelIon
LPR relocation Ala Proto Matrix?
Or maybe some geo3 like adjustment?
I'm doubting both.
LPR cap still on the rear.
No solenoid adjustment most likely. That can be done via dwell and LPR settings. LPR controls the speed of the bolt by pushing the bolt forward when the solenoid is activated.
Most likely the bolt contains further refinement to reduce turbulent air flow and increase efficiency.
I wouldn't mind running a DM at a little higher pressure, less volume chamber, and at a lower dwell. 10-12 pods doesn't seem too far fetched.