Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 10-12-2012, 08:44 PM #1
FeVeR12's Avatar
Join Date: May 2006
 has been a member for 10 years
FeVeR12 plays in the APPA D5 division
Clone GT - Small O ring floating around

Just got my Clone GT and noticed this little o ring when I took the grip off.

I couldn't see where it may have come off from and the gun was shooting fine. I'm wondering if it came off from something that it should be on or if it just got in there on accident.

Last edited by FeVeR12 : 10-12-2012 at 09:12 PM.
FeVeR12 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 10-12-2012, 10:22 PM #2
Mark S.
Mark S.'s Avatar
Join Date: May 2009
Location: NH
Mark S. works for a Paintball manufacturer
 plays in the NXL
Mark S. plays in the APPA D4 division
If it's shooting fine and you have no leaks then I wouldn't worry about it. There are only a couple of places that o-ring could have come from.

It looks like it's a 2x1. There are (2) 2x1's below the solenoid, and 1 of them on top of subplate A between the subplate and the foregrip.

You could remove the foregrip and solenoid to see if the o-ring is missing from either of those places, but again, if it's not leaking right now I would just leave it alone and continue shooting people!
Mark S. is offline   Reply With Quote
Old 10-13-2012, 11:04 AM #3
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
This could of happened during assembly that an oring got stuck to the board or the underside of the marker then bolted together. I've seen it once or twice and it's nothing to be alarmed about if there are no issues currently with the marker.
SHOOTNPOO is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump