[Jeancarlo0098]

Hello Pbnation members

I decided to buy a new reflex rail 2012 model, ive used this gun twice so far and the macroline stays stiff even when the gun is degassed, i cant remove the macroline because its on real tight. In videos regarding my paintball marker people just remove the macroline and twist off the regulator. I wanted to see if my marker is malfunctioning or im doing something im not supposed to. Im concern when the time comes to give maintenance to the regulator im not going to be able to remove it.


Sincereley,
Jean

[htownseanthomas]

I can't picture any reason why you wouldn't be able to remove it while the gun is not pressured. On the steel fittings attached to your ASA and reg there is a small ring on the very end. You push that ring and pull the line in opposite directions. Push the ring in (towards the fitting) and pull the line out. It's easy to spot once you look closely.

[Jeancarlo0098]

Ty sir

[htownseanthomas]

Were you able to remove it?

[Jeancarlo0098]

When i get off college i will. Thank you again sir

[Jeancarlo0098]

yeah it worked thank you so much.

[htownseanthomas]