When I screw in my tank all the way and my asa is in the off position, it still vents air from the little hole in the bottom ad I already took it apart and checked the o-rings for damage. Any suggestions?
University of North Texas Paintball Team
try moving the asa on off switch a little up or down to hit that sweet spot. most NT's have this issue nothing serious. Else try replacing and lubing the yellow o-ring in the asa using the special dye tool to remove the screw on cap at the back of the asa.
i did this to mine and it solved it, just make sure to seat the o-ring properly as there are groves where the o-ring sits, so its not drop in and screw on job.