[r_clarke]

Tm 15 with the RF transmitter in gun , and chip in the RC.
Works smooth about 70% of the time, but it misses some trigger pulls...
Even with New Batteries in Both Gun and hopper.

Ex: turned on the gun with EYES off, after turning on the RC.
Then pull, the 1st 3 or 4 will turn , but miss the 5th, then the 7th
in random ways like that..missing up to 4 trigger pulls b4 spinning again..

Happens while playing, so id like to know if there is a way to correct it..

[TheEnglishGuy]

Do you have the same problem if you try it with the side of the marker off and the RC held close to the open side with the antennae closest? If so sounds like a faulty board. If not, you could try adjusting both antennae so they're more directed towards each other.

English