[MacDave]

I'm looking to build my own e-bolt. I've heard of people using a clippard ram instead of using the factory ebolt rams. Every post I've found has links to parts but if you click they go to the clippard home page. I'm wondering if someone has a part number or at least dimensions to one that will work

[spinny2559]

If you just look inside the gun you can take your own measurements to determine the dimensions and stroke.
Other than that, I should have an E-bolt ram lying around. If I dig it up I can measure.
Keep in mind, the stroke doesn't need to be an exact length, just the necessary length or slightly longer.

[MacDave]

I'm still looking for a gun. The stroke I've already found should be 1.33 ideally but 1.5 is the closest option. My concern is more with the piston and rod diameter. I don't want to go too small and end up bending the shaft, but I also don't want to go too big and need too much lpr pressure.

[spinny2559]

The diameter of the shaft shouldn't matter too much as long as it is secure in the housing. You should be more concerned with finding/making a housing that holds it securely than the ram itself.