Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 05-11-2013, 07:30 PM #1
Snetard
Shift
 
Snetard's Avatar
 
Join Date: Jun 2011
Location: Long Island, NY
Snetard owns a Planet Eclipse Geo
Snetard has perfected Level 1 in PbNation Pursuit
Snetard supports DLX Technology
Quest wont cycle fully

Hey, my quest will only cycle fully for one shot then it stops cycling unless I wait a few seconds. I've tried a bunch of things but I am out of ideas.

I have already...
-Changed o-rings on bolt + guide a few times to see if hand fit would work, didn't do anything.
-Tried 2 different hpr's
-Tried a different solenoid from my dm5 which is working perfectly
-Changed the battery 3 times
-Took out lpr valve core to inspect o-rings, they looked fine but i'm not sure if it could be damaged otherwise (maybe someone has had a similar problem and this was the cause, because i'm not sure what a broken valve core causes )
-Also I am not out of air

~~LPR is at around 100 dwell is at 12

Thanks
Here is a video!
Snetard is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-11-2013, 08:17 PM #2
ironyusa
reappropriating resources
 
ironyusa's Avatar
 
Join Date: Apr 2013
Location: Dallas, TX
My board went out and had similar symptoms.
__________________
New ideas being shown at: inceptionforums.com
ironyusa is offline   Reply With Quote
Old 05-11-2013, 08:38 PM #3
Snetard
Shift
 
Snetard's Avatar
 
Join Date: Jun 2011
Location: Long Island, NY
Snetard owns a Planet Eclipse Geo
Snetard has perfected Level 1 in PbNation Pursuit
Snetard supports DLX Technology
Hmm, didn't even think about that.. hopefully thats not the issue D:
Thanks.

Last edited by Snetard : 05-11-2013 at 08:46 PM.
Snetard is offline   Reply With Quote
Old 05-11-2013, 11:25 PM #4
Demo2222
.
 
Demo2222's Avatar
 
Join Date: Jun 2011
Location: socal
Annual Supporting Member
Demo2222 is playing at Living Legends VII
Demo2222 supports Empire
Bad valve core will cause the lp to creep- don't think it would cause those symptoms.
Have you rebuilt the lpr? Or cleaned and relubed the piston oring. Almost seems like the lp isn't recharging?
Or could be the board. What board is in there? Ape? How are you setting the lp? Do you have a gauge you use to set it then remove the gauge? It might help to have the gauge on while trouble shooting.
Nice raider btw

Last edited by Demo2222 : 05-11-2013 at 11:30 PM.
Demo2222 is online now   Reply With Quote
Old 05-12-2013, 12:33 AM #5
Snetard
Shift
 
Snetard's Avatar
 
Join Date: Jun 2011
Location: Long Island, NY
Snetard owns a Planet Eclipse Geo
Snetard has perfected Level 1 in PbNation Pursuit
Snetard supports DLX Technology
Yeah I cleaned/lubed the piston, didn't change the o-ring guess ill try that as well tomorrow. I have a lucky ace board. Yeah I set it to 100 because the only working gauge I have at the moment is old and goes from 0-500 so its kinda hard to see anything. But yeah it seems like it isn't recharging which is why I swapped noids but its doing the same thing with one that i know works.
Thank you :p
Snetard is offline   Reply With Quote
Old 05-12-2013, 09:19 AM #6
Demo2222
.
 
Demo2222's Avatar
 
Join Date: Jun 2011
Location: socal
Annual Supporting Member
Demo2222 is playing at Living Legends VII
Demo2222 supports Empire
Is it possible that you need to turn up the lp a little more? Do you know what the output on the hpr is?
If all else fails and you want to send me the board I can test it on a known working platform and let you know if that's the issue
Demo2222 is online now   Reply With Quote
Old 05-12-2013, 10:25 AM #7
excope
Legacy of 806
 
excope's Avatar
 
Join Date: Mar 2007
Location: TN
Annual Supporting Member
excope is BST Legit
excope owns a Planet Eclipse Etek
excope is for the Gunfight
excope has achieved Level 3 in PbNation Pursuit
excope supports DLX Technology
excope supports Empire
I agree with Demo on his last post. Acts like the lp is too low, even on the first shot. May not be the issue but that's where I'd start.
__________________
Christ Krew
excope is offline   Reply With Quote
Old 05-12-2013, 11:14 AM #8
ironyusa
reappropriating resources
 
ironyusa's Avatar
 
Join Date: Apr 2013
Location: Dallas, TX
Also, not sure if you're aware, but gauges are only accurate towards the middle 25% of their range. A 0-500psi wouldn't be real accurate at 100psi.
__________________
New ideas being shown at: inceptionforums.com
ironyusa is offline   Reply With Quote
Old 05-12-2013, 12:51 PM #9
Demo2222
.
 
Demo2222's Avatar
 
Join Date: Jun 2011
Location: socal
Annual Supporting Member
Demo2222 is playing at Living Legends VII
Demo2222 supports Empire
this- if you decide to buy a gauge get a 0-160. I think I found them on amazon last time I bought a couple. these http://www.amazon.com/Custom-Product...60+micro+gauge


Quote:
Originally Posted by ironyusa View Post
Also, not sure if you're aware, but gauges are only accurate towards the middle 25% of their range. A 0-500psi wouldn't be real accurate at 100psi.
Demo2222 is online now   Reply With Quote
Old 05-12-2013, 06:00 PM #10
Snetard
Shift
 
Snetard's Avatar
 
Join Date: Jun 2011
Location: Long Island, NY
Snetard owns a Planet Eclipse Geo
Snetard has perfected Level 1 in PbNation Pursuit
Snetard supports DLX Technology
Fixed it! thanks for the help everyone. Heard a tiny leak coming from the lpr today which I didn't hear yesterday. It was the size 18 o-ring on the top of the lpr housing.. it looked fine but i guess it was worn out just enough to not work which is why I didn't change it yesterday. Gonna pick up one of those gauges as well if I cant find mine thanks demo :]
Snetard is offline   Reply With Quote
Old 05-13-2013, 09:26 AM #11
ironyusa
reappropriating resources
 
ironyusa's Avatar
 
Join Date: Apr 2013
Location: Dallas, TX
Glad you got it fixed. I strongly recommend putting a vent hole in the LPR (through the screw or reg body -- Juit modding) if it doesn't have one already.
__________________
New ideas being shown at: inceptionforums.com
ironyusa is offline   Reply With Quote
Old 05-13-2013, 10:44 PM #12
Snetard
Shift
 
Snetard's Avatar
 
Join Date: Jun 2011
Location: Long Island, NY
Snetard owns a Planet Eclipse Geo
Snetard has perfected Level 1 in PbNation Pursuit
Snetard supports DLX Technology
It does not, thanks :]
Snetard is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump