The way I do it is:
-fit the o'rings until the bolt slides easily but still seals (I push it all the way back, then try pulling it by the mouth while sealing with my thumb, it'll have some springlike resistance if it seals well; make sure to do this before installing the spring, if you do)
-set dwell to stock
-chrono with HPR
-lower dwell until inconsistent and bump back up by 1 ms
-re-chrono with HPR
-go play (easier said than done in my case)
Last edited by tacxplosion : 01-12-2014 at 12:20 PM.