[Tonz976]

So my luxe was shooting solid 290.. 292 .. 290
2 days after I can't shoot pass 265 .. The reg is all the way in
Paint / bore match is good

Luxe 2.0
Dwell 16
FSDO 4 feather touch out
Ninja pro reg pushing 550 psi
EF rod in

[1dayteam120]

did you mess with anything? maybe you need to change the oring on the can not sure which # it is but I did that when I was having issues with vlocity and helped a ton

[Bmaus24]

My first guess would the O-ring (17/70 HN) In the front of the luxe body shot out. If it isn't that then replace the 17/70 in the backcap and the first one inside the can as the guy above me stated.

[Gbxdillon]

Rebuild the reg clean it good

[Ragin Cajun]

Clean and rebuild the reg.

[DanR]

id just raise the dwell first if raising the dwell doesnt fix it do exactly what is stated above

[X A N A T 0 S]

Raising the dwell above 16 isn't going to solve your problem, try rebuilding the reg, examine the orings, and your reg seat. If everything looks fine there, throw it back together, making sure your filter gets placed back correctly, and try rebuilding your bolt assembly.

[poopresearch]

Sometimes the newer style reg springs can cause issues like this. When you sevice the reg, not whether or not the spring is shiny (newer style) or dull (older style). You may also want to add another shim to that ninja reg.

If servicing reg doesn't fix the problem, report back here.

[X A N A T 0 S]

Originally Posted by poopresearch

Sometimes the newer style reg springs can cause issues like this. When you sevice the reg, not whether or not the spring is shiny (newer style) or dull (older style). You may also want to add another shim to that ninja reg.

If servicing reg doesn't fix the problem, report back here.

I've heard of it, but didn't want to claim/throw the idea out there in case I was wrong. Duly noted...

[Shemp 5]

As said before. Rebuild the reg. Raising the dwell won't do anything. Then do as bmaus suggested

[ic3m5n]

shemp 5 this has happened to me at a tourney what i did was just to bring back a turn on manifold and i took out the feathertouch screw. get the grun pressurized when the air kicks in just a full turn on asa then gradually increasing your fps to where you need to. before i did this i had to get my reg to almost open to where the air is leaks to get to 290 alone. hope this helps and i also do suggest rebuilding the reg as a critical oring may have been damaged

[thegiff420]

This happened to me today also. The gun is brand new used last wkend at practice and this wkend at a tournament. My dwell is set on 12 out of the box and the only way I could get into the 280's was to adjust my reg a lot more than I wanted to. What can I do to fix this?

[lungilung]

Ft and ef rod can cause this

[ncampos976]

Reg spring. I had mine replaced by dlx for same reason

[cliffhanger]

I have 2 luxe 2.0s with this same issue. Both where bought new shot 10+ cases no problem now they will not shoot over 270.

[Samjooma12 (Banned)]

Really don't need to shoot over that anyways

[cliffhanger]

ya you do if you want to shoot someone otb

[thegiff420]

I haven't even put that many cases thru mine lol

[cozmo5050]

[Samjooma12 (Banned)]

Originally Posted by Tonz976

So my luxe was shooting solid 290.. 292 .. 290
2 days after I can't shoot pass 265 .. The reg is all the way in
Paint / bore match is good

Luxe 2.0
Dwell 16
FSDO 4 feather touch out
Ninja pro reg pushing 550 psi
EF rod in

Clean you regulator, I've seen many people can't shoot over 300 and their reg spring is bad

[Tonz976]

Originally Posted by Samjooma12

Clean you regulator, I've seen many people can't shoot over 300 and their reg spring is bad

Thanks but please read the whole thing before posting ... I didn't start playing paintball last week ... Of course I cleaned and checked my Reg