I recently pulled my 2k1 LCD out of the closet because some friends were talking all about playing some PB recently. Its been sitting untouched for 8-9 years. As expected it didn't turn on, the battery in it was toast. I did the CR123 mod here: http://www.angelowners.com/showthrea...able-batteries
and low and behold it turned right on to the Safe screen. The board looks like its been completely reset, the serial is reset to 000 000 and the cycles counter reset as well. All the other modes are also locked with only semi left.
This weekend I took it to the field for some testing. A few drops of oil in it and to my surprise is worked! A little adjustment to the velocity and I put a round of paint through it. It never skipped a beat, started slow at first then started firing them about 14 bps to finish the hopper off. Didn't chop a ball even. I then preceded to play some speedball with it and my oldschool gear which includes a JT Flex mask and a 12V Revy with X-Board and speed collar (Who even remembers what an X-Board is?).
Anyways, now that I have this thing and it works I've been looking at what mods I should do to it. I would love a newer board but I feel like its blasphemy to sack a working LCD board. I have access to mills, lathes, and I can do most any electronics works. What would you guys do?
Here she is in all her ancient glory.