Geo+ problem. Would like some assistance.
Hokay. So, I have a Geo+ and when I went to shoot it, it was shooting like it was still in training. mode. I checked the settings and training mode was turned off. Then I replaced the battery with a brand new Duracell. Still didn't work. I replaced all the orings in the bolt, took the gun completely apart, cleaned, and lubed it. Put it back together and it still act's like it's in training mode. I went and reset all of the settings back to default and that didn't help. Looked up somewhere that the solenoid could be the problem so took it off cleaned the ports and the red gasket. I took out the solenoid spool and replaced the orange orings with new black orings. Put it all back together and it still does the same thing. I even went to the extent of putting a friends Geo solenoid that works fine in his gun in mine and still no difference. I am at a loss of what to do and would like some help. I'm headed to World Cup 2012 in a couple of weeks and didn't want to send it off somewhere to get it fixed, when I heard that there are PE techs there that could fix it. I was just curious if any of you have had this problem and fixed it on your own.
Thanks a lot.
I'm too legitimate to quitimate.