 |
|
10-15-2012, 08:17 PM
|
#1534
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by Pfffft..I'm Back
Hey does anyone have any V2 raps orings that they can get to me by this weekend? I will gladly pay premium. Even with lp reg on tank the fx keeps blowing asa orings. Pm if so and thx
|
Quote:
Originally Posted by xmc1146
ace hardware is your friend my friend.
|
This ^^^ is probably your quickest bet. I can try to get some out to you in tomorrow's mail but since I'm in Cali, they may or may not make it there in time.
For reference. The RAPS o-ring size is a 3.68mm inside diameter (ID) X 1.78mm cross section (CS) - or the ol' standard -007. ACE hardware should have plenty of o-rings but they are listed in nominal sizes.....so you will need the 5/32-inch ID X 9/32-inch OD X 1/16-inch cross section.
On a side note, I am assuming that you have tried the whole move the RAPS forward or back thing so that the vent hole isn't covered, right?
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
10-15-2012, 08:18 PM
|
#1535
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by Trigger Finger
i have a dumb phone.... so i cant get an app.
|
 - I has one too
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:21 PM
|
#1536
|
|
Yetipb.com
Join Date: Mar 2010
Location: Northampton, PA
|
Quote:
Originally Posted by CA_Tectonics
This ^^^ is probably your quickest bet. I can try to get some out to you in tomorrow's mail but since I'm in Cali, they may or may not make it there in time.
For reference. The RAPS o-ring size is a 3.68mm inside diameter (ID) X 1.78mm cross section (CS) - or the ol' standard -007. ACE hardware should have plenty of o-rings but they are listed in nominal sizes.....so you will need the 5/32-inch ID X 9/32-inch OD X 1/16-inch cross section.
On a side note, I am assuming that you have tried the whole move the RAPS forward or back thing so that the vent hole isn't covered, right?
|
i got him covered...
__________________
Reverse Poison 2K12 Bob Long G6R
DP G3 Spec r W/ Techt Bolt Engine, VP Deuce Trigger, and a 7E OLED Board
2K2 Vert. Feed Autococker W/ CCM Pump Kit and Gat Products A/T
My Gear Bag Sale!!! Click Me!
|
|
|
|
|
10-15-2012, 08:22 PM
|
#1537
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by Trigger Finger
i got him covered...
|
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:23 PM
|
#1538
|
|
Yetipb.com
Join Date: Mar 2010
Location: Northampton, PA
|
Quote:
Originally Posted by phant0m0
do you have an email address I'll send you the pictures and the template.
|
pm'd. just make sure you give me your preferences on colors and other artwork that you may want on them
__________________
Reverse Poison 2K12 Bob Long G6R
DP G3 Spec r W/ Techt Bolt Engine, VP Deuce Trigger, and a 7E OLED Board
2K2 Vert. Feed Autococker W/ CCM Pump Kit and Gat Products A/T
My Gear Bag Sale!!! Click Me!
|
|
|
|
|
10-15-2012, 08:24 PM
|
#1539
|
|
Join Date: Feb 2010
Location: Northern CA
|
WHOOT HOO!!!!!!
Just found out that my new phone will be available in 3 days 
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:25 PM
|
#1540
|
|
Yetipb.com
Join Date: Mar 2010
Location: Northampton, PA
|
Quote:
Originally Posted by CA_Tectonics
WHOOT HOO!!!!!!
Just found out that my new phone will be available in 3 days |
what phone?
__________________
Reverse Poison 2K12 Bob Long G6R
DP G3 Spec r W/ Techt Bolt Engine, VP Deuce Trigger, and a 7E OLED Board
2K2 Vert. Feed Autococker W/ CCM Pump Kit and Gat Products A/T
My Gear Bag Sale!!! Click Me!
|
|
|
|
|
10-15-2012, 08:28 PM
|
#1541
|
|
Join Date: Feb 2010
Location: Northern CA
|
Razr Maxx HD
Just called my Verizon and they confirmed that the 18th is a go. I'll be there when the doors open
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:30 PM
|
#1542
|
|
Yetipb.com
Join Date: Mar 2010
Location: Northampton, PA
|
Quote:
Originally Posted by CA_Tectonics
Razr Maxx HD
Just called my Verizon and they confirmed that the 18th is a go. I'll be there when the doors open |
nice!
__________________
Reverse Poison 2K12 Bob Long G6R
DP G3 Spec r W/ Techt Bolt Engine, VP Deuce Trigger, and a 7E OLED Board
2K2 Vert. Feed Autococker W/ CCM Pump Kit and Gat Products A/T
My Gear Bag Sale!!! Click Me!
|
|
|
|
|
10-15-2012, 08:34 PM
|
#1543
|
|
Join Date: Feb 2010
Location: Northern CA
|
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:34 PM
|
#1544
|
|
(ノò_ó)ノ_
Join Date: May 2010
Location: Jersey
|
I prob need a new phone soon as well. My iPhone has two large cracks in the screen (my fault). It works fine, so I'm not worried. Not sure how I feel about the iphone5 though...
|
|
|
|
|
10-15-2012, 08:39 PM
|
#1545
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by specopsdeath2
I prob need a new phone soon as well. My iPhone has two large cracks in the screen (my fault). It works fine, so I'm not worried. Not sure how I feel about the iphone5 though...
|
Just get the glass replaced if the phone is perfectly fine.
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:44 PM
|
#1546
|
|
(ノò_ó)ノ_
Join Date: May 2010
Location: Jersey
|
I'm not sure I want to know how much apple will charge me for that...
|
|
|
|
|
10-15-2012, 08:47 PM
|
#1547
|
|
Yetipb.com
Join Date: Mar 2010
Location: Northampton, PA
|
Quote:
Originally Posted by specopsdeath2
I'm not sure I want to know how much apple will charge me for that...
|
your best bet is to do it yourself. its not even that hard to do. if you have any doubts just look it up on youtube. they tons of how to videos for the iphone screen replacements
__________________
Reverse Poison 2K12 Bob Long G6R
DP G3 Spec r W/ Techt Bolt Engine, VP Deuce Trigger, and a 7E OLED Board
2K2 Vert. Feed Autococker W/ CCM Pump Kit and Gat Products A/T
My Gear Bag Sale!!! Click Me!
|
|
|
|
|
10-15-2012, 08:51 PM
|
#1548
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
buy parts on ebay and they come with tools.
|
|
|
|
|
10-15-2012, 08:52 PM
|
#1549
|
|
DPOTer since 2007
Join Date: Apr 2007
Location: Bloomington, Ill-a-noiz
|
Quote:
Originally Posted by Trigger Finger
your best bet is to do it yourself. its not even that hard to do. if you have any doubts just look it up on youtube. they tons of how to videos for the iphone screen replacements
|
Quote:
Originally Posted by basementN3k0
buy parts on ebay and they come with tools.
|
there you go |
|
|
|
|
10-15-2012, 08:54 PM
|
#1550
|
|
I love dehr.
Join Date: Mar 2010
Location: sacramento, cali
|
Gunna see 7 psychopaths
I'm a little early
And by a little I mean 2 hours
__________________
INFAMOUS
HoustonHeat
Ninja Air Systems/YetiPB
Ninja Club/Shocker Owners
GEAR FST
|
|
|
|
|
10-15-2012, 08:55 PM
|
#1551
|
|
(ノò_ó)ノ_
Join Date: May 2010
Location: Jersey
|
I'll look it up and see if I can do it myself
|
|
|
|
|
10-15-2012, 08:57 PM
|
#1552
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by Trigger Finger
your best bet is to do it yourself. its not even that hard to do. if you have any doubts just look it up on youtube. they tons of how to videos for the iphone screen replacements
|
Quote:
Originally Posted by basementN3k0
buy parts on ebay and they come with tools.
|
I've done both of these to replace a dead batery in an ipod - worked great. I'm sure the glass is just as easy.
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:57 PM
|
#1553
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by 916baller
Gunna see 7 psychopaths
I'm a little early
And by a little I mean 2 hours
|
LOL
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
10-15-2012, 08:59 PM
|
#1554
|
|
Join Date: Feb 2010
Location: Northern CA
|
Quote:
Originally Posted by specopsdeath2
I'll look it up and see if I can do it myself
|
Do you have the 3, 4 or 4S?
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
