Help gun keeps on shooting

Xistence · 10-01-2012, 07:15 AM

When i releash the trigger gun go's full auto!
I already put the debounce up and the trigger is really loose...
Its a 2012 g6r.

gamer565 · 10-01-2012, 07:17 AM

Are you in semi auto?

What's your debounce at?

Xistence · 10-01-2012, 07:19 AM

Yes millennium mode i try the debounce from 8 to 50

gamer565 · 10-01-2012, 07:53 AM

millennium is full auto...

Set it to semi auto..

Xistence · 10-01-2012, 07:57 AM

Millennium is 10.5 but its on 10 the bord has no .5

SKI008 · 10-01-2012, 08:07 AM

Put the trigger spring back in or find a pen spring of that length to use. The stock G6R trigger is very hard to run springless without bounce.

Xistence · 10-01-2012, 08:10 AM

Quote:

Originally Posted by SKI008

Put the trigger spring back in.

The spring is in, but can it be the micro switch?

SKI008 · 10-01-2012, 08:19 AM

Are you sure the spring is correctly placed? Sometimes the spring can catch the top of the microswitch. Make sure it is not doing that. Also make sure your switch activates fairly late in your trigger pull, around 2/3 of the way.

Xistence · 10-01-2012, 08:23 AM

Ok i gonne try that, i get back here when its not ok.

Thanks so far!

specopsdeath2 · 10-01-2012, 03:30 PM

Quote:

Originally Posted by SKI008

Also make sure your switch activates fairly late in your trigger pull, around 2/3 of the way.

this.

Xistence · 10-02-2012, 08:54 AM

Yes i know he said that, i gonne look if the spring is in place.

And it was.....

So gun is still shooting full auto in semi mode

SKI008 · 10-02-2012, 11:17 AM

Try stretching the spring or getting a slightly stiffer one.

I really doubt your microswitch is bad.

gamer565 · 10-02-2012, 01:05 PM

Quote:

Originally Posted by Xistence

Yes i know he said that, i gonne look if the spring is in place.

And it was.....

So gun is still shooting full auto in semi mode

millennium =/= semi auto

Make sure your board actually reads that its in semi auto.

Quote:

Originally Posted by Xistence

Yes millennium mode i try the debounce from 8 to 50

specopsdeath2 · 10-02-2012, 01:14 PM

Quote:

Originally Posted by Xistence

Yes i know he said that, i gonne look if the spring is in place.

And it was.....

So gun is still shooting full auto in semi mode

i meant make sure you do this as well.

D-man[WarLlamas] · 10-02-2012, 04:08 PM

Quote:

Originally Posted by SKI008

...make sure your switch activates fairly late in your trigger pull, around 2/3 of the way.

^^^This

Also, reset the board to factory default.

Does it go full auto even with it degassed? ie: You hear the noid clicking full auto.