Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-27-2012, 05:47 PM #1
SH3
 
 
SH3's Avatar
 
Join Date: Oct 2010
Location: San Death, TX
SH3 plays in the PSP
SH3 owns a Planet Eclipse Lv1
SH3 plays in the APPA D4 division
bad oring and swapped em out
__________________
Ricky
SPEEDBOAT

Sponsored by: G.I. Sportz, X-Factor Paintball Park, V-Force

Last edited by SH3 : 11-29-2012 at 01:36 PM.
SH3 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-27-2012, 06:41 PM #2
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
The noids leak if over preasured, reg seat is bad or needs to be flipped.
You can check the 3 valve orings to make sure eaxh one ia sealing inside the Keg. The rear oring on the valve if not sealing will vent through the noid. Also make sure the middle power tube oring is sealing inside the bolt.

Sounds more like an oring issue or over pressurizing than the noid.
SHOOTNPOO is offline   Reply With Quote
Old 09-27-2012, 06:49 PM #3
Mark S.
CHOWDAH
 
Mark S.'s Avatar
 
Join Date: May 2009
Location: NH
Mark S. works for a Paintball manufacturer
Mark S. plays in the APPA D4 division
Just as shootnpoo said, check the valve o-rings.

My GT was doing the same exact thing and it turned out to be a valve o-ring that was a bit undersized.

Best way to check them is to remove all but one of the o-rings and check that one, then move onto the next one until you've done all 3. That way you won't be replacing unnecessary o-rings if that in fact ends up being the issue. You should be able to feel some friction when you slide the valve in and out of the keg to determine if it is sealing properly.
Mark S. is offline   Reply With Quote
Old 09-27-2012, 06:50 PM #4
SH3
 
 
SH3's Avatar
 
Join Date: Oct 2010
Location: San Death, TX
SH3 plays in the PSP
SH3 owns a Planet Eclipse Lv1
SH3 plays in the APPA D4 division
Quote:
Originally Posted by SHOOTNPOO
The noids leak if over preasured, reg seat is bad or needs to be flipped.
You can check the 3 valve orings to make sure eaxh one ia sealing inside the Keg. The rear oring on the valve if not sealing will vent through the noid. Also make sure the middle power tube oring is sealing inside the bolt.

Sounds more like an oring issue or over pressurizing than the noid.
Ok many thanks and will check that all over the next couple days
__________________
Ricky
SPEEDBOAT

Sponsored by: G.I. Sportz, X-Factor Paintball Park, V-Force
SH3 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump