[dyetrix2006]

is it still possible to get an eblade or any other cocker electronic conversions.

[cruciatus111]

yup, but there all going to be used, check Ebay and BST

[MikeM]

Originally Posted by dyetrix2006

is it still possible to get an eblade or any other cocker electronic conversions.

Are you looking for an eblade kit to convert a mech, or looking for an ebladed cocker to replace a mech? Some people find it easier to sell their current mech and buy a working e-cocker.

If you want to convert a mech, you'd need to decide if you want to use the eyes or 'run it blind'. To use the eyes, your body would need to be drilled with a hole for the eye sensor and another hole drilled and tapped for the eye cover screw. If you don't want to drill your body (undrilled bodies tend to be more sought after), with force fed hoppers, running an eblade 'blind' is an option.

Eblade kits can be found in various colors. Easiest to find are black and chrome. I've seen red and blue pop up from time to time.

I may be able to help you either way.

[PaulE2Cocker]

To be honest if you convert your current gun it's just easy to run it blind because a standard eblade autococker with a z2 I have no chops with eyes off as long as I dont run the hopper low under heavy fire rates. And in my opinion it makes the gun look smoother with no eye cover hanging off..

[dbkid0486]

if you want something new, NDZ put out an electronic cocker frame about a year or two ago. Compulsivepaintball and ebay have them for sale, but you gotta buy all the guts for it as well.

Paintballgateway also sells Worrblades(WGPs E1 frame) new but that too has none of the internals and would need to be fitted with all needed hardware.

best bet is to look on ebay/customcockers/pbn/mcb for a used set to pop up.

[dyetrix2006]

thank you all for the responses.