Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-13-2008, 08:16 PM #1
PBSnipexxx
 
 
PBSnipexxx's Avatar
 
Join Date: Feb 2008
Location: Coquitlam, Canada
Delta 68 O-ring sizes

ok im going away for a weekend where i will not be able to pick up anything for the gun so im looking to stock up on supplies now. Can someone tell me all the sizes of the o-rings in the gun and also a good oil to pick up for it.
__________________
VSC Phantom *Custom Anno*
Blue Delta .68
PBSnipexxx is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-13-2008, 10:42 PM #2
mark1975
Hawkeye
 
mark1975's Avatar
 
Join Date: Sep 2005
Location: NJ
mark1975 works for a Paintball manufacturer
The valve and hammer orings are a 015 size. The one oring you should stock up on is the valve face oring(where the 12 gram seals). I'm not sure of the size but you can get them from PaintballSolutions for about .50 cents a oring. Its also agood idea to apply some paintball grease to that oring. Paintball oil like gold cup will also work, but as oil is thinner it wont stay in place as long. Really the only other part to lube is the hammer.
mark1975 is offline   Reply With Quote
Old 03-13-2008, 11:12 PM #3
PBSnipexxx
 
 
PBSnipexxx's Avatar
 
Join Date: Feb 2008
Location: Coquitlam, Canada
so should i not get oil?
__________________
VSC Phantom *Custom Anno*
Blue Delta .68
PBSnipexxx is offline   Reply With Quote
Old 03-13-2008, 11:30 PM #4
mark1975
Hawkeye
 
mark1975's Avatar
 
Join Date: Sep 2005
Location: NJ
mark1975 works for a Paintball manufacturer
When I was repairing Delta markers, I mainly used grease. Paintball oil is not bad to use, but usally its going to end up in the barrel after afew shots.

I used A Dow 33 grease on the valve face oring, hammer and a very little amount on the bolt.
mark1975 is offline   Reply With Quote
Old 03-14-2008, 07:42 PM #5
Rockfrog
off in la la land, BC
 
Rockfrog's Avatar
 
Join Date: Jun 2006
Location: Duncan, BC Canada
the offending o-rings size is -010 Urethane D90 ... I've used regular Buna replcements from home depot and the sort as well (they just don't last as long).
__________________
Dave G
Too many markers, a hopper, and HPA
I am the rotting corpse of a long dead cash cow!
Rockfrog is offline   Reply With Quote
Old 09-19-2012, 01:17 AM #6
nyeagley
 
 
Join Date: Sep 2012
Quote:
Originally Posted by Rockfrog View Post
the offending o-rings size is -010 Urethane D90 ... I've used regular Buna replcements from home depot and the sort as well (they just don't last as long).
Part# 29 valve face o-ring

I just recently had gotten some o-rings from Paintball Solutions for my Delta .68. At my work we have a huge selection of o-rings and the -010 does not match up. We ended up using a caliper to figure out the size of the o-ring. The o-ring seems to be a metric o-ring and not a standard. How metric o-rings work is you measure the thickness of the o-ring and the ID not the OD like on a standard o-ring. It seems to measure 2mm thick 23mm ID. I do not think you will find this size in a Home Depot/ Lowes, but McMastercarr has them. I hope this helps.

P.S. I asked Paintball Solutions what size it was and they did not seem to know.

Last edited by nyeagley : 09-19-2012 at 01:21 AM.
nyeagley is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump