Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-16-2012, 01:31 AM #1
reveredge
Edge_of_A&E
 
reveredge's Avatar
 
Join Date: Jan 2011
Location: TN
Question Azodin Blitz bolt return

Well, the Blitz has been decent for the most part, with a quirk here and there.
However, today it gave me issues with the bolt not returning to the cocking position. I've tried lube, but it didn't really help.

Any ideas?
reveredge is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-16-2012, 09:26 AM #2
ttimberlak443
aaaaaaaand its gone
 
ttimberlak443's Avatar
 
Join Date: Apr 2012
Location: Stephens City, VA
ttimberlak443 supports Team VICIOUS
ttimberlak443 posts videos on PbNation
ttimberlak443 plays in the APPA beginner division
ttimberlak443 has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by reveredge View Post
Well, the Blitz has been decent for the most part, with a quirk here and there.
However, today it gave me issues with the bolt not returning to the cocking position. I've tried lube, but it didn't really help.

Any ideas?
Check your striker oring. That seems to be the biggest cause of recocking issues that I've seen. Make sure when you put it in, you push the sear down with an allen key, not by pulling the trigger because that seems to tear the orings and you're right back at square one.
ttimberlak443 is offline   Reply With Quote
Old 09-16-2012, 10:36 PM #3
Slo poke
 
 
Slo poke's Avatar
 
Join Date: Jun 2011
Location: Hot Azz AZ
Try a new battery. had the same problem.
Slo poke is offline   Reply With Quote
Old 09-17-2012, 02:05 PM #4
Azodin Tech
Azodin staff technician
 
Azodin Tech's Avatar
 
Join Date: Feb 2012
Annual Supporting Member
The striker O-ring is our only proprietary O-ring, if it has been replaced with an aftermarket ring chances are it will not re-cock. Also if the reg pressure is too low the marker will not re-cock. 4 and 1/2 CCW turns from reg-off should set you around 400psi (operating pressure of Blitz).
Azodin Tech is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump