Recently bought an Impulse and know next to nothing about it except it shoot amazing. Im not having any issues with it except the reg twists alittle. Any idea what year it might be? Heres a pic...
it has a WAS board eye cover on it so that may be why its shooting so great lol those boards are the best in old impys....not sure the year...i believe toward the end of the impy run they were using the shocker regs on them but i could be mistaken...clean impy sir...nice collection as well
it has a WAS board eye cover on it so that may be why its shooting so great lol those boards are the best in old impys....not sure the year...i believe toward the end of the impy run they were using the shocker regs on them but i could be mistaken...clean impy sir...nice collection as well
Wow, didnt know about the eye cover. Thanks. Love them all
The ASA is the part with the gauge and brass high pressure release valve.
The ASA to body:
Take off the hose first. Then with a big adjustable wrench (with electrical tape on the jaws to keep things pretty), back the locking nut down a little. (The locking nut is that piece about 1/8" thick with the flat sides touching the ASA.) That should loosen the the reg. Unscrew that and up inside the ASA is a Hex headed bolt that holds the ASA to the body
The Reg to ASA:
Just tighten the Lock Nut
lol those boards are the best in old impys....not sure the year...i believe toward the end of the impy run they were using the shocker regs on them but i could be mistaken...clean impy sir...nice collection as well
