[xninjamica]

I got both a 8 and 8.1 recently and noticed the oldet mags don't fit on the 8.1. I read you could mod it to fit so anyone have any directions on what to do?
Also are there any mods to turn the old mags that need an Allen key for co2 cartridges to Tooles?

Thanks for any help!

[xninjamica]

Also just realized when I try to eject the mags from the t8(original mags) it doesn't pop out like it should. I gutta pull pretty hard to Gerry it off

[splatthetick]

go tiberiusarms.com/forums there is a whole lotta info there, bruddah.

[NoX13]

its simple enough to mod them to work..
you have to file the top of the mag where you feed the paint into..more specificly the front lip by the little bar that is attached to the spribg.. you have to file that down as much as the 8.1 mag lip.

as for the sticking.. that is usually due to thw orings by the mags valve.. give tiberius a call and let them know the issue,from what ive found online thwy will send replacements
to fix the issue.. the orings are a tighter innwr diamater which cause more drag on the valve pin on the bottom of the marker.

hope that helps a bit.

[NoX13]

oh and you can order the tooless parts from both tiberius and sellers on ebay..

[xninjamica]

yea i found a how to for the mod yesterday.
as far as mag stick i think its just because theres supposed to be air in the mag to use the pressure or something like that.

Awesome about the tooless part thanks Nox!

[NoX13]

Originally Posted by xninjamica

yea i found a how to for the mod yesterday.
as far as mag stick i think its just because theres supposed to be air in the mag to use the pressure or something like that.

Awesome about the tooless part thanks Nox!

no problem..

but the drag caused by the slightly off sized origns can cause that issue more often.. the mags qith or without air should eject with little to no effort..
sometimes a few drops of oil also help but look uo the oring issue thwre has veen threads on it.