Jerry I got you. Also some one can correct me if I am wrong but I believe the 1.5 board and 1.0 board are the same. Get a freak boremaster kit (stainless steel one is better I hear) and some monkey poo. Any other issues I can help.
After Hours Crew
Also a new luxe owner. 1.0, but have pootypoo and pootied 2.0 core on the way already.
In terms of tuning, is there a general "across the board" for board settings? (Luxe 1.0 with Pootied 2.0 core (rhino spring)). Probably going to run a ninja at 550psi. Dwell and all the other settings? Or is it mostly gun-specific, and I have to play around and figure out what is best?
EDIT: Found all I need in the sticky that I only skimmed over before. One question though, what is meant by this? "until the luxe fully cycles a paintball at the chrono speed that matches its operation pressure. Basically if your luxe was shooting 290fps at the default dwell but a much lower fps now then we need to keep raising it “1MS” at a time."
I've got a pooty core and a 2.0 core and neither is installed right now in my 1.5. Get it out of the box ans shoot it a bit before you go with the upgrades. On the barrel, I'd just get a few stainless inserts. I would not get the whole kit, as you will likely only use two or three inserts, and the rest is just more to carry.