Okay if its leaking from the breach it could a couple of things. It might be an o-ring break in the LPR in which case cleaning and lubing and replacing the o ring should solve the problem. It could be an o ring on the actual zick bolt kit itself in which case replace it. Worst case, the solenoid is damaged and you need to make a trip to the repair centre. Hope this helps!
You do not know what you do not know
Rammer housing front face will have scatches on it causing the poppit to not seal properly. All eteks do it eventually no air filter so any crap gets blasted to the poppit face then gets repeatedly hammered with every shot damaging the face.
I polished the scratches off mine must be done on an even surface and gradually if your gonna do. You'll be surprised i found little stones and metal shavings in not sure why they never put a filter in hpr like...