[peacob]

Besides punch my friend in the face... what are my steps at taking care of the gun? What should i be taking apart and cleaning?

I played PB back in the day a lot with blow backs and cockers, but this is my first electro and i leave for a day and my roommate decided to use the rest of his c02 tank in my gun without realizing its meant for HPA/Nitro only. He said he went through 3/4 of a hopper, so i'm hoping this isnt detrimental.

Thanks in advance

[peacob]

seriously? no one has any advice? If you think i'm fine, then just say i'm fine... if you think there might be an issue, then tell me what it could possibly be.. I am playing tomorrow, and dont currently have any air to try the gun out at the moment. I'd just hate to show up tomorrow and have something go wrong

[lpmaster]

You'll most likely be fine. Clean/relube bolt before playing.

[tlmiller]

As long as liquid co2 didn't get into the noid and damage it, it'll be just fine. co2 is only dangerous because of it's tendency to cool down when being fired, and thus have liquid co2 get into the marker. The extremely fragile solenoids cannot withstand the pressure of liquid co2 evaporating into 800psi co2 gas inside of them. Other than that, co2 is completely safe, although does wear orings a bit faster.

[peacob]

Thanks guys, i'll do a quick relube before i go out... hopefully they have hater sauce at the storefront.

appreciate the help