[PaintballLegion158]

Ok I bought a DM7 and the reg will not come off!!!! And i have no clue what to do! Any help would be amazing thanks!

[jlonz]

I assume the top part of the reg is staying on the marker. Take the reg off leaving the top part of the reg attached to the marker, then take an allen key and remove it from the marker. Sorry, I forget the size of the allen key needed.

Hope this helps

[grss429]

Originally Posted by PaintballLegion158

Ok I bought a DM7 and the reg will not come off!!!! And i have no clue what to do! Any help would be amazing thanks!

if only the half top part is staying on, I'd leave it, it's a lot easier to deal with then the whole reg.., for cleaning wise.., if it's the whole reg, there is a big Allen key on the bottom of the reg, right after the velocity adjuster

[SmartWorrPartsPlayer]

It would be better if we know exactly what the issue you are having is. Saying that your Reg will not come off is a little broad to us.

I can recommend a "Strap Wrench" to crank it off.

Or as my previous DM helpers have suggested. Allen keys, if you get the entire bottom portion of the Hyper2 off and the Top Cap is still in the Body you can put the Correct Allen Key Size inside the Top Cap and crank that off as well.

[HateEverything]

Assuming you are trying to remove the reg from its reciever: Use a strap wrench just at the point of the top threaded seal of the reg. That way you aren't disassembling the reg itself.