So I just got playing paintball again. And I pulled out my E-Bladed Cocker and it seems like from sitting for so long that the solenoid died. It looks like the grease from my lower internals leaked down into the top of the frame while it sat. Does anyone know of anyone who is still an E-Blade Tech or whatnot. I want to get my cocker check out and see if my E-Blade is still able to work or if it is shot all together and I need to get a new one. Thanks
Ok so I just tossed a new battery in and I was mistake the sear solenoid is fine. But I do still have a problem. For some reason the magnetic return isn't returning it after the solenoid fires. Any suggestions?
not sure why the trigger would fit your sear issue unless the trigger travel does not back out far enough for the opti sensor. under the sear there should be a spring that causes the sear noid to be return to the starting position.